New 202303
Scale notes:
https://www.starwars.com/databank/tie-fighter
- Length 8.99m
https://www.starwars.com/databank/x-wing-starfighter
- Length 13.4m
Will try ratio 13/8 = ~1.625
Star_Wars_X_Wing__S-foils_in_attack_position_5175115
- Prusa Mk3+
- Prusa supplied Silver/Grey PLA
- option Prusament PLA
- Print settings = 0.15mm Quality
- Scaled 50%
- reported size (X, Y, Z) = 64 x 58 x 54, expect overall once glued length = 2 x Z = Length 108mm
Huge amount of stringing, would’ve been a great print without that..
Same again but
- Prusa supplied Silver/Grey PLA
- option Prusa PLA
- Scaled 40%
- reported size (X, Y, Z) = 51 x 46 x 43, expect overall once glued length = 2 x Z = Length 86mm
Tie_Fighter_1150625
Looking to size same as 40% X-Wing above, X-Wing = L 80mm, Tie Fighter should be 50mm
- Prusa supplied Silver/Grey PLA
- option Prusa PLA
- Scaled 58%
- reported size (X, Y, Z) = ~55 x 68 x 50, expect overall once glued length = 2 x Z = Length 50mm
Star_Wars_X_Wing__S-foils_in_attack_position_5175115
- Scaled 60%
- reported size (X, Y, Z) = ~77 x 70 x 65, expect overall once glued length = 2 x Z = Length 130mm
- Print settings = 0.20mm Quality
- Printer Settings -> Extruder 1 -> Retraction length changed 0.08 to 1.1
Then again retraction 1.4 still stringing..