20180917 WIP Removable more or less easy replacement of saw easier to clean/collect alum dust Can do full 45 degree rotation each way as to the left was not giving clean cuts before (clamps were obstructing rotating to the right) 20180910 Old:
Category: Aluminium Profile
20180216 Goal: Setup mill to consistently/repeatedly mill 10mm in from end of 2020 profiles along the centerline Bolt Vice in making sure is at right angle to x axis Put custom alignment tool into 12mm Collet & mount into mill (push as far as possible into collet) Pack rear of vice with 2020 Length and […]
Straight Tapping is too tight and deforms the outer surface 13/64 =, 5.1594 Best result = Drill out M5 using 13/64 Tap using cordless drill, tap is Genuine Sutton Tools Tap T385 M6x1 6H STRAIGHT FLUTE N ISO529 Inter HSS Not cheap but repeatable results I have both CRC Cutting oil & WD40 ‘WORX’ I […]
NZ Duty Code 8467.22.0029F 2020 slot has depth of 6mm Single 2020 corner brackets have M5.5 hole?, thickness 3mm, so need M5*8 + washer, so M5*8 & M5*10 For Hammer head bolts: M5*3+nut = Dual 2040 corner brackets have M4.5 hole?, thickness 4.5mm, so need M4*10 + washer, so M4*10 & M4*12