# Alum 2018

ORDER NET WEIGHT SHIPPED/RECEIVED

I expect to receive:

2020V profile: 1417pcs x 2.52m x 0.56kg/m = 1999.67kg
2040V profile:  404pcs x 2.52m x 0.98kg/m = 997.72kg
2060 profile: 132pcs x 2.52m x 1.5kg/m = 498.96kg
2080 profile: 107pcs x 2.52m x 1.85kg/m = 498.83kg

Received pieces:

• 2020V:
• 2040V:
• 2060:
• 2080:

20180901 checking space

Onhand:

2020:

• 10 sticks x 2.5m x (12 in each packet) = 300m = 120 lengths @ 20x20mm = 135kg @ 0.45 kg/m
• Each packet 90mm x 60mm

2040

• 40 sticks x 2.5m x (6 in each packet) = 600m = 240 lengths @ 20x40mm = 570kg @ 0.95kg/m
• Each packet 90mm x 60mm

On Order:

2020

• 2000kg @ 2.52m, approx 3600m = approx 1400 lengths @ 20×20
• Assuming same packets = 120 packets
• Between ceiling rafter = 6 packets across (6 x 60mm)
• So 6 packets by 20 packets along (90mm dimension) = 1.8m along

2040

• 1000kg @ 2.52m, approx 1000m = approx 400 lengths

2060

• 500kg

2080

• 500kg

What about 3030 series?

How much can we store under a 1m high workbench?

How much space does 3030 take:

• Assuming 0.95kg/m
• Assuming 4000kg
• Assuming 3.65m lengths
• = approx 1150 lengths 3030
• How many can you fit 900mm high? (Assumes losing 100mm of our 1m to top/bottom etc)
• = 900mm / 30mm = 30
• so how many across = 1150/30 =  approx 38 = 1150mm wide
• Conclusion: 4000kg 3030 at 3.65m lengths = 1150 lengths fits end on into 900x1150mm

So can we turn this into a usable workbench?

 Bench width 950 1000 1100 1200 1300 1400 Lose either side 50 100 100 100 100 100 100 Storage width 850 900 1000 1100 1200 1300 Lengths high 30 30 30 30 30 30 Lengths wide 28 30 33 36 40 43 Lengths 840 900 990 1080 1200 1290 KG 0.95 3.65 2912.7 3120.75 3432.82 3744.9 4161 4473.07

1400mm wide option looks useful:

• So we would have  alum stacked in a rack 3.65m long by 1.4m wide to a height of 1m
• Longways:
• Allow 100mm space between outside wall and end of alum to keep dry
• 3750 to other end of alum from side wall
• Side wall needs room for cutting so can’t use first 500mm
• From sidewall to edge of regular door = just under 3.6m
• So maybe bench top = 3.2m x 1.4m
• Will allow Pick & Place on 1 side & cnc machine on the other (700mm deep each one), or in a row with plenty of space on the other side